Fixed Readers - A928
UHF long range reader (ETSI EN 300 220)
- Multi Protocol
- Four antenna ports
- ETSI EN 300 220 compliant
- Multiple host interfaces: RS232, RS485, USB and = Ethernet
- Fully upgradeable
- Four programmable digital I/O lines
The A928 is a multiprotocol long range reader =
developed in=20
Europe fully compliant to the European ETSI EN 300 220 (869.525 MHz) =
regulation.=20
Capable of long distance reading using extremely low RF energy,the =
A928EU=20
has been optimized to increase receiver sensibility and reduce =
transmitter=20
noise. The A928 can cover distances of 5-6 meters (16-20 feet) with our =
A918=20
universal mounting passive tags.
The A928=92s open architecture uses =
a=20
multi-protocol technology.
The protocol interface was developed =
using a=20
Field Programmable Gate Array which allows easy modification of the =
protocol=20
definition. On the host side, a powerful 32bit micro-controller enables =
fast=20
firmware updating for maximum upgradeability to future generations of =
UHF=20
protocols.
Easily integrated with most popular database software and =
fully=20
compliant to Philips UCODE EPC 1.19, ISO 18000-6B and EPC Class1 Gen2 =
protocols,=20
the A928 can be used in conjunction with any tag compliant to the same=20
standards.
Applications:
- Industrial controls
- Pick =
and put=20
away applications
- Vehicles access control systems
- RFID =
tunnels
-=20
Portal applications
![3D"CAEN](3D"http://www.caen.it/rfid/data_sheet/img/ordering_code.gif")
WA928XAAAAAA
A928EU - UHF long range reader (ETSI EN 300 =
220)
WANTENNAX005
Circular polarized 860 - 960 MHz antenna
WANTENNAX007
Linear polarized 860 - 970 MHz antenna
WCAVOAAAX001
TNC-N antenna cable, insertion loss 0.32dB/m, =
length=20
5m
![3D"CAEN](3D"http://www.caen.it/rfid/data_sheet/img/spec_rfid.gif")
Frequency |
869.525MHz (ETSI EN 300 220) |
Output Power |
SW programmable Max.: 630 mW (28 = dBm) |
Antenna Connectors |
Nr. 4 TNC type female |
Frequency Tolerance |
=B110 ppm over the entire temperature = range |
Number of Channel |
Single channel: compliant to ETSI EN = 300=20 220 |
Channel Occupancy |
In accordance with ETSI EN 300 = 220 |
Standard Compliance |
ISO 18000-6B Philips UCODE EPC = 1.19 EPC=20 C1G2 |
Digital I/O |
Four TTL input lines (optically =
isolated)=20
Four TTL output lines (open collector 100mA sink optically=20 isolated) |
Ports |
RS232 RS485 Half duplex USB = 2.0 Full=20 Speed Ethernet 10/100BASE-T |
Dimensions |
295 x 92 x 165 mm^3 (11.6 x 3.6 x = 6.5=20 inches^3) |
Electrical Power |
110V/220V 50Hz/60Hz |
Operating Temperature |
-20 =B0C to 70=B0C |
Weight |
2.220 g |
![3D"CAEN](3D"http://www.caen.it/rfid/data_sheet/img/riga_footer.gif")
=A9 2007 CAEN RFID Srl - info@rfid.caen.it
Via Vetraia, 11 - 55049 = Viareggio=20 (LU) - ITALY
Tel +39 0584 388 398 - Fax +39 0584 388=20 959
http://www.rfid.caen.it - e-mail:=20 info@rfid.caen.it